Class d 800 watts 2 channel stereo audio professional digital power amplifier

Categories	1U DIGITAL AMPLIFIER
Brand	Sinbosen\| Audio sound system manufacturer
Model	K-800
Stereo/output power 8Ω /1KHz	800Wx2
Stereo/output power 4Ω /1KHz	1200Wx2
Bridge/output power 8Ω 1/KHz	2400W
Bridge/output power 4Ω /1KHz	3600W
THD（10% -1KHz）	<0.1%
Net weight	3.8Kg
Speed rate（1KHz）	>20V/μs
Dynamic range	≥95dB
Terms of Payment	Western Union, MoneyGram, T/T, Paypal
Download
Update Time	Dec 22,2024

Contact Now

Favorites

Detail Information

Model Specs	K-1200	K-1000	K-800
Stereo/output power 8Ω /1KHz	1200Wx2	1000Wx2	800Wx2
Stereo/output power 4Ω /1KHz	1850Wx2	1500Wx2	1200Wx2
Stereo/output power 2Ω /1KHz	2300Wx2	2000Wx2	1600Wx2
Bridge/output power 8Ω 1/KHz	3600W	3000W	2400W
Bridge/output power 4Ω /1KHz	5000W	4000W	3200W
Frequency Response（8Ω/ 100mS/second）	20Hz-20KHz±1dB
THD（10% -1KHz）	<0.1%
Speed rate（1KHz）	>20V/μs
Noise insulation factor(1KHz)	>250
Dynamic range	≥95dB
Signal-to-noise ratio	≥95dB
Input sensitivity（1KHz）	2Vrms
Input impedance	20K（balance）/ 10K（imbalance）
Net weight	3.8Kg

Class D amplifier is developed by the best engineers and professional musicians. You will find the Class D amplifier are cost-effective, stable, and fully protected amplifiers.

Class D digital power amplifiers are popular among users at home and abroad because of their environmental protection, energy saving, small size and utilization rate of more than 97%. Products are sold in Europe, America and other countries.

Performance characteristics:

1. Volume step control.

2. Balanced input XLR stereo (two channels), stereo and bridge modes of operation.

3. Independent limiting, overload, overheating and short protection circuit.

Features: safety performance:

1: Use NTC boot soft start.

2: With PFC automatic voltage regulator circuit.

3: Each channel has independent overpressure and overheating.

4: load short-circuit protection.

5: There is an automatic limiting function to prevent damage to the sounder.

Review

Loading...